|
| Your basket: |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Die-Cast Smove Mounting Bracket, Screw-Fix
Product Ref: D076SN9
|
 |
|
|
|
|
|
|
|
Product Information : -
A die-cast mounting bracket for use with the D005SNG Smove shock absorber, for mounting the system onto the side panel positioned on the gable end opposite the mounting plates.
Drilling:-
The first hole should be drilled 10mm from the edge of the carcase and the second hole centre should be 32mm from the first hole centre.
To be used with the S2BX83H9 cover cap supplied separately without the Salice logo.
General Information : -
Tested to 200,000 operations, the Smove shock absorber system is a controlled buffer mechanism which absorbs the impact of doors, preventing them from slamming and causing any unecessary noise and damage. Although Smove can be used with drawers, the variety and weighting of different drawer systems will reduce it's effectiveness and therefore it is not generally recommended for this use.
The Smove range consists of a choice of piston used in conjunction with a grommet for face boring applications (use only on 18/19mm carcase) or an adaptor for surface mounting. The D001 piston is positioned on the top or bottom of the cabinet according to the size of door and the number of hinges. The D002 piston offers a simpler solution with the piston mounted on the gable, opposite to the mounting bracket. The D004 piston incorporates the simplicity of the D002 piston with an integrated grommet for easier installation in face boring applications. A drilling jig (SMJ1) is available for accurate face drilling.
Brackets are available to suit various applications and various colour options are available for grommets and brackets.
|
|
|
|
|
|
|
|
|
|
|
